Mk7 golf r sequential headlights12/31/2023 ![]() You don’t disconnect it from the connector, just add on the third wire to it. You will splice the third wire into this. On the hatch side of the harness, you will need to locate the inner-right tail lamp harness connector. if you go this route, I highly recommend you leave enough length in order to splice it back to stock if you want. It’s really expensive for one wire, but it’s crimped with the correct terminals already and you can order from whatever VW stockist you would like.Īnother option, since you need to remove pin 4 from the outer-left body side harness anyways is to snip it and reuse it for the third wire. Here is the VW part number 000-979-025-E for the actual wire. you can source these from TE Connectivity or a supplier of their parts. You will need a terminal for inner-left body side tail lamp harness. I guess they are at 28 ish? Set them to 10 instead and report back. ![]() What are the current vehicle coding values for: If that's the case w/ your vehicle you're out of control. The general idea of apps isn't bad, but I've seen to many minor MY changes from the factory in the coding. IMO you should never use any OBDeleven apps. Coding is always specific to the harness and application (lights, vehicle.). Plug & Play but coding required for proper function, and it even comes w/o coding list? Unless you know what you are doing, how can you even send money to these guys?Ģ. "Amazon - Product description: Brand new adapter harnesses for the MK7 Golf/GTI Euro LED taillights! Give your vehicle amber turn signals and inner taillights with functioning brake/signal lights! Made with automotive grade wiring and OEM connectors! Comes with pre-labeled wires! Harnesses are Plug & Play, but coding with VCDS will be required for proper function! This listing is for (4) wiring harnesses only!" I apologize if this sounds rude to you but here are your 2 issues:ġ. So can anyone help me with the coding changes I need to make to get these 2 situations working correctly? More interested in fixing #2, but doing both would be nice. They actually did that before I did any coding, which is kinda funny. They don't do the change from the running lights to brake lights as they're supposed to. ![]() AndĢ- the outer brake lights are always the brake lights, they just get brighter and dimmer. So I back-tracked those changes, and did the 15 changes from post #5 again, and that has me to the point as seen in the linked video below.īasically, 1- the inner lights are working as brake lights, which I actually don't mind, even though it's not correct. So I tried all the coding from the 4 page attachment from post #14, and that royally messed everything up. Then I used the instructions from post #5 on this thread, and that got me even closer, but not right. I first did the OBD11 "DAP wiring harness" coding, and that wasn't quite right. All the lights are working now, but not really in the fashion that they should be. Hi All- I finally got the harness from Amazon, and got around to wiring up my VLand tails.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |